Subaru 2009 Legacy - Manual (Page 293)

Black plate (301,1)
北米Model "A2450BE-A" EDITED: 2008/ 3/ 24
release it. Then release the accelerator
pedal.
Vehicle with SI-DRIVE
Vehicle without SI-DRIVE
At this time, the “ ” indicator light is
illuminated in the combination meter.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
The cruise control can be temporarily
canceled in the following ways:
. Push the “CANCEL” button.
. Depress the brake pedal.
. Depress the clutch pedal (manual
transmission vehicles only).
. Shift the selector lever into the “N”
position (automatic transmission vehicles
only).
. Shift the shift lever into neutral position
(manual transmission vehicles only).
The
“ ” indicator light in the combination
meter goes off when the cruise control is
canceled.
To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 20 mph (32
km/h) or more, push the
“RES/ACC”
button to return to the original cruising
speed automatically.
The
“ ” indicator light in the combination
meter will automatically illuminate at this
time.
Starting and operating
7-47
– CONTINUED –
7