Subaru 2009 Legacy - Manual (Page 100)

Black plate (102,1)
北米Model "A2450BE-A" EDITED: 2008/ 3/ 24
2-8
Keys and doors
( “LOCK”) position.
! Behavior with key lock-in preven-
tion function non-operational
. If the lock lever is turned to the rear
(
“LOCK”) position with the driver’s door
open and the driver ’s door is then closed
with the lock lever in that position, the
driver
’s door is locked.
. If the spare key is used to lock the
driver
’s door from the outside of the
vehicle, the door is locked.
This function ’s operational/non-opera-
tional setting can be changed.
Vehicle with genuine SUBARU naviga-
tion system:
The operational/non-operational setting
can be changed using the monitor. For
details, please refer to the Owner
’s Man-
ual supplement for the monitor system.
The setting can also be changed by a
SUBARU dealer. Contact the nearest
SUBARU dealer for details.
Vehicle without genuine SUBARU navi-
gation system:
The setting can be changed by a
SUBARU dealer. Contact the nearest
SUBARU dealer for details.
NOTE
. The factory setting (default setting)
for this function is set as
“operational”.
. When leaving the vehicle, make sure
you are holding the key before locking
the doors.
Remote keyless entry system
CAUTION
. Do not expose the transmitter to
severe shocks, such as those
experienced as a result of drop-
ping or throwing.
. Do not take the transmitter apart
except when replacing the bat-
tery.
. Do not get the transmitter wet. If it
gets wet, wipe it dry with a cloth
immediately.
This device complies with Part 15 of
the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject
to the following two conditions: (1) This
device may not cause harmful inter-
ference, and (2) this device must
accept any interference received, in-
cluding interference that may cause
undesired operation.
Changes or modifications not ex-
pressly approved by the party respon-
sible for compliance could void the
user
’s authority to operate the equip-
ment.