Dynex DX-24L200A12 - Manual (Page 25)

Adjusting the sound
21
DX-24L200A12
• Phase—Adjusts the focus of stable images.
• Reset Computer Settings—Resets computer
settings to factory default.
6 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Adjusting the sound
Adjusting sound settings
To adjust the sound settings:
1 Press MENU. The on-screen menu opens with the
Picture menu displayed.
2 Press or to highlight Audio, then press . The
Audio menu opens.
3 Press or to highlight an option, then press or
to adjust the setting. You can select:
• Sound Mode—Selects the EQ sound mode. You
can select Standard, News, Music, Movie, or
Custom.
• Treble—Adjusts the high sounds.
• Bass—Adjusts the low sounds.
• Balance—Adjusts the balance between the left
and right audio channels.
• Auto Volume—Adjusts the volume to keep the
volume level consistent when switching
channels or when switching from a TV show to a
commercial. You can select On or Off.
• Audio Language—Selects the default language
track when watching digital TV programs.
Options include English, Français (French), and
Español (Spanish).
• MTS/SAP—Selects the default language stream
when watching analog TV. You can select:
• MONO–if there is noise or static on weak
stereo broadcasts.
• STEREO–for programs broadcast in stereo.
• SAP–to listen to a secondary audio program
(if available).
• Reset Audio Settings— Resets all audio settings
to factory defaults.
4 Press MENU to return to the previous menu, or press
EXIT to close the menu.
Playing TV audio only
You can turn off the picture on your TV and listen to the
program audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens with the
Picture menu displayed.
2 Press or to highlight Channels, then press .
The Channels menu opens.
3 Press or to highlight Audio Only, then press
or to select On.
4 Press EXIT to close the menu. After pressing EXIT,
the picture turns off in approximately 3 to 5 seconds. Note
You can also press AUDIO on the remote control to
select the audio mode.
Picture Mode Standard
Contrast
Brightness
Color
Tint
Sharpness
BackLight
Advanced Video
Reset Picture Settings
Back Select Move
Adjust settings to affect picture quality
MENU EXIT Exit
Picture Audio Settings Channels
29
55
Sound Mode
Treble
Bass
Balance
Auto Volume
MTS/SAP
Digital Audio/SPDIF PCM
Off
Mono
English Audio Language
Reset Audio Settings
Back Select Move
Adjust settings to affect sound quality
MENU EXIT Exit
Picture Audio Settings Channels
Note
You can also press MTS/SAP on the remote control
one or more times to select the audio mode.
Notes
• Audio only works only when the input source is
TV and your TV is receiving a broadcast signal.
• To exit Audio Only mode, press any button.
When you exit audio only mode, the Audio
Only option is automatically reset to Off.
Picture Mode Standard
Contrast
Brightness
Color
Tint
Sharpness
BackLight
Advanced Video
Reset Picture Settings
Back Select Move
Adjust settings to affect picture quality
MENU EXIT Exit
Picture Audio Settings Channels
29
55
Auto Channel Scan
Add/Skip Channels
Favorites
Channel Label
Channel Strength
Audio Only
Back Select Move
Adjust the audio with the picture turned off
MENU EXIT Exit
Auto Zoom
Picture Audio Settings Channels
DX-24L200A12_11-0584_MAN_ENG_V1.book Page 21 Wednesday, September 14, 2011 12:59 PM