Dynex DX-24L200A12 - Manual (Page 22)

18
Understanding the basics DX-24L200A12
Understanding the basics
Turning your TV on or off
To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (Power) to turn on your TV. The power
indicator LED turns blue.
3 Press (Power) again to turn off your TV. Your TV
enters Standby mode.
Selecting the video input source
To select the video input source:
1 Turn on your TV, then press INPUT. The INPUT
SOURCE list opens.
2 Press or to highlight the video input source,
then press ENTER. You can also press a direct input
button on the remote control to select the video
input source.
• Press VIDEO to select the device connected to
the AV IN jacks.
• Press HDMI to select a device connected to an
HDMI jack.
• Press TV to select the TV input source.
• Press COMP to select the device connected to
the COMPONENT video jacks.
• Press VGA to select the device connected to the
PC IN VGA jack.
Using the on-screen menus
Picture menu (TV mode)
Audio menu (TV mode)
Settings menu (TV mode)
Channels menu (TV mode)
Navigating the menus
Notes
• Depending on the signal source selected, you
may see different options on your screen. The
following menus are shown in TV mode.
• Menu items that are not selectable are grayed
out.
• Menus in this manual are described in TV mode,
unless otherwise indicated.
• The screens shown in this manual are for
explanation purposes and may vary from the
actual screens on your TV.
Component
INPUT SOURCE
Picture Mode Standard
Contrast
Brightness
Color
Tint
Sharpness
BackLight
Advanced Video
Reset Picture Settings
Back Select Move
Adjust settings to affect picture quality
MENU EXIT Exit
Picture Audio Settings Channels
29
55
Sound Mode
Treble
Bass
Balance
Auto Volume
MTS/SAP
Digital Audio/SPDIF RAW
Off
Mono
English Audio Language
Reset Audio Settings
Back Select Move
Adjust settings to affect sound quality
MENU EXIT Exit
Picture Audio Settings Channels
Time
Closed Caption
Menu Settings
Computer Settings
Input Labels
Back Select Move
Set various TV options
MENU EXIT Exit
System Info
Power on in Vivid Mode
Off
Reset to Default
Picture Audio Settings Channels
Parental Controls
Auto Channel Scan
Add/Skip Channels
Favorites
Channel Label
Channel Strength
Audio Only
Back Select Move
Adjust the audio with the picture turned off
MENU EXIT Exit
Auto Zoom
Picture Audio Settings Channels
M ME EN NU U
M ME EN NU U
E EX XIITT
Press MENU to open the on-screen menu.
Press or to select menu options.
Press ENTER to confirm a selection or
enter a sub-menu.
Press MENU to return to the previous menu.
Press EXIT to close the menu.
Press or to move the cursor on the
screen or to adjust a selected item.
DX-24L200A12_11-0584_MAN_ENG_V1.book Page 18 Wednesday, September 14, 2011 12:59 PM