Subaru 2012 Impreza User Manual

Page 33

Black plate (33,1)

北米Model "A1120BE-B" EDITED: 2011/ 10/ 28

! Head restraint height adjustment

Head restraint

Release button

Each head restraint should be adjusted so
that the center of the head restraint is
closest to the top of the occupant

’s ears.

To raise:
Pull the head restraint up.
To lower:
Push the head restraint down while
pressing the release button on the top of
the seatback.
To remove:
While pressing the release button, pull out
the head restraint.
To install:
Install the head restraint into the holes that

are located on the top of the seatback until
the head restraint locks.
! Head restraint angle adjustment

The angle of the head restraint can be
adjusted in several steps. While maintain-
ing a suitable driving posture, adjust the
head restraint to a position where the back
of your head is as close to the head
restraint as possible.

To tilt:
Tilt the head restraint by hand to the
preferred position. A click will be audible
when the head restraint is locked.
To return:
Tilt the head restraint once as far forward
as it can go. The head restraint will
automatically return to the fully upright
position. Then, adjust the head restraint

again to the preferred angle.

Seat, seatbelt and SRS airbags

1-5