Subaru 2012 Impreza User Manual

Page 175

Black plate (183,1)

北米Model "A1120BE-B" EDITED: 2011/ 10/ 28

then pull the

“ /SET” switch toward you.

3. The current setting is displayed. Pull
the

“ /SET” switch toward you to enter

the selection mode.

4. Select the preferred setting by operat-
ing the

“ ” or “ ” switch, and then pull

the

“ /SET” switch toward you.

5. Select

“Set” by operating the “ ”

switch, and confirm the setting by pulling
the

“ /SET” switch toward you.

6. The system will notify you that the
setting is complete for approximately 3

seconds.
If the setting is not available, the following
notification will be displayed for approxi-
mately 3 seconds. For more details,
contact a SUBARU dealer.

& Initialize

Items that have been set to your pre-
ference can be initialized. To select an
initialization menu, operate the

“ ” or “ ”

switch as follows.

! Preparation for initialization
1. Turn the ignition switch to the

“ON”

position, and then pull the

“ /SET” switch

toward you for more than 2 seconds.

Instruments and controls

3-61

– CONTINUED –