Subaru 2012 Impreza - Manual (Page 247)

Black plate (261,1)
北米Model "A1120BE-B" EDITED: 2011/ 10/ 28
NOTE
You cannot set Bluetooth ® audio while
driving.
! Registering (pairing) device
NOTE
Only one device can be registered.
1. Select the following menu.
– “PAIR AUDIO” (type B audio)
– “Pair Audio Player” (type C audio)
If a device is already registered, “MEM-
ORY FULL ” is displayed and the mode
changes to the Bluetooth ® audio setting
mode.
2. After the passkey is shown on the
display, input the passkey into the device.
– If you input the correct passkey,
“PAIRED” is displayed and the regis-
tration procedure is finished.
– If you input an incorrect passkey,
“FAILED” is displayed, the registration
procedure was not successful and the
mode changes to the Bluetooth
®
audio setting mode.
NOTE
After the ignition switch is turned to the
“LOCK” position, the registered device
is not automatically connected to the
system even if the ignition switch is
turned to the “ACC” or “ON” position.
! Selecting device
1. Select the following menu.
– “SELECT AUDIO” (type B audio)
– “Select Audio Player” (type C audio)
If no devices are registered, “EMPTY” is
displayed and the mode changes to the
Bluetooth
® audio setting mode.
2. Select the “CONFIRM” menu.
– If the device is connected, “SE-
LECTED
” is displayed and the select-
ing procedure is finished.
– If the device cannot be connected,
“FAILED” is displayed and the select-
ing procedure was not successful.
! Setting passkey
1. Select the
“SET PASSKEY” menu.
– After the currently set passkey is
displayed, a new passkey can be
entered.
2. Input the new passkey by operating
the
“TUNE/TRACK/CH” dial.
3. Select the “CONFIRM” menu.
– The new passkey is displayed, the
passkey is changed and the mode
changes to the Bluetooth
® audio
setting mode.
! Deleting device
1. Select the following menu.
– “DELETE AUDIO” (type B audio)
– “Delete Audio Player” (type C
audio)
If no devices are registered, “EMPTY” is
displayed and the mode changes to the
Bluetooth
® audio setting mode.
2. Select the “CONFIRM” menu.
– “DELETED” is displayed and the
mode changes to the Bluetooth
®
audio setting mode.
& Bluetooth ® audio operation
NOTE
Depending on the connected device, it
may not activate as per the following
items or not work smoothly.
! How to play back
Press the
button and select the “BT-
A ” (type B audio)/“BT Audio” (type C
audio) mode.
! To select a track from its beginning
Select a track in the same way as for a
CD. Refer to
“To select a track from the
beginning ” F5-19.
Audio
5-35
– CONTINUED –
5