Daewoo DPN-3500 - Manual (Page 21)

5
The GPS bar is a toggle button that displays the remaining travel distance and travel time, estimated
time of arrival, and speed and altitude, and street name and address number.
When you have calculated a route, the Directions bar displays information about your next turn. Click
this bar for a complete list of turn-by-turn directions.
GPS Not Found
When you first start your navigation device, you will hear the message “Signal too low”. This message means
that your navigation device hasn’t yet located a reliable GPS signal. Check that your device is connected and
has a clear view of the sky. If after five minutes, you have not located a reliable signal, go to the “Technical
Support” section on page 34.
Please check that:
• The GPS antenna is extended or flipped up.
• The device has a clear view of the sky for uninterrupted GPS reception. Destinator cannot calculate the
route if there is no GPS reception (for example, in a tunnel).
• The navigation device is charged or connected to the cigarette lighter.
Map Views
You can determine whether you want to see a two-dimensional or three-dimensional map in daylight or
nighttime conditions.
The 2D Day Mode View is optimized for a daytime viewing. 2D views let you manually pan or zoom. For an
example, refer to Figure 2 - 2D Day Mode Map View.
The 2D Night Mode View is optimized for night driving or adverse weather conditions. For an example, refer
to Figure 3 - 2D Night Mode Map View.
The 3D Mode Day View or Night View provide you with a three-dimensional map for day or night driving. For
an example, refer to Figure 4 - 3D Day Mode Map View and Figure 5 - 3D Night Mode Map View.
From the Options menu, click the 3D Mode button to view a three-dimensional map. If the map
already appears in three-dimensions, 2D Mode is displayed on the toggle button. You can click
the Night Mode button to display the map in night conditions. If the map already appears in night
mode, Day Mode is displayed on the toggle button.