Saab 2006 9-2 - Manual (Page 290)

11-52
Maintenance and service
¢ License plate light
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the cover and lens.
3. Pull the bulb out of the socket. Install a
new bulb.
4. Reinstall the lens and cover.
5. Tighten the mounting screws.
¢ Dome light, map light and
cargo area light
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket. Install a
new bulb.
3. Reinstall the lens.
NOTE
Other bulbs may be difficult to replace.
Have your Saab dealer replace these
bulbs if necessary.
B00499
700104
700106
B00461
A1910BE-A-GSAAB.book Page 52 Tuesday, September 6, 2005 8:37 AM