Saab 2006 9-2 User Manual

Page 275

Maintenance and service

11-37

– CONTINUED –

1) Stopper

2. Remove the wiper blade assembly by

holding its pivot area and pushing it in the

direction shown by the arrow while de-

pressing the wiper blade stopper.

3. Install the wiper blade assembly to the

wiper arm. Make sure that it locks in place.

4. Hold the wiper arm by hand and slowly

lower it in position.

¢ Windshield wiper blade rub-

ber

1) Metal support

1. Grasp the locked end of the blade rub-

ber assembly and pull it firmly until the

stoppers on the rubber are free of the met-

al support.

1) Metal spines

2. If the new blade rubber is not provided

with two metal spines, remove the metal

spines from the old blade rubber and in-

stall them in the new blade rubber.

B00380

B00330

B00504

B00059

A1910BE-A-GSAAB.book Page 37 Tuesday, September 6, 2005 8:37 AM