Saab 2006 9-2 User Manual

Page 289

Maintenance and service

11-51

– CONTINUED –

2. Remove the side cover.

3. Remove the upper and lower bolts.

Then, slide the rear combination lamp as-

sembly to the rear and remove it from the

vehicle.

1) Rear turn signal light
2) Brake/tail light
3) Backup light

4. Remove the bulb socket from the rear

combination light assembly by turning it

counterclockwise.

5. Pull the bulb out of the bulb socket and

replace it with a new one.

6. Set the bulb socket into the rear combi-

nation light assembly and turn it clockwise

until it locks.

7. Put the rear combination light assem-

bly into place while aligning the clip with

the guide on the vehicle and fasten the

bolts.

8. Install the side cover and secure it with

the clips.

B00497

B00498

B00534

A1910BE-A-GSAAB.book Page 51 Tuesday, September 6, 2005 8:37 AM