Saab 2006 9-2 User Manual

Page 29

Seat, seatbelt and SRS airbags

1-5

– CONTINUED –

Seat heater 3

Driver’s side
1) HI – Rapid heating
2) LO – Normal heating

Front passenger’s side
1) HI – Rapid heating
2) LO – Normal heating

The seat heater operates when the igni-

tion switch is either in the “ACC” or “ON”

position.

To turn on the seat heater, push the “LO”

or “HI” position on the switch, as desired,

depending on the temperature. Selecting

the “HI” position will cause the seat to heat

up quicker.

The indicator located on the switch comes

on when the seat heater is in operation.

When the vehicle’s interior is warmed

enough or before you leave the vehicle,

be sure to turn the switch off.

Each active head restraint is ef-

fective only when its height is

properly adjusted and the driver/

passenger sits in the correct posi-

tion on the seat.

If your vehicle is involved in a

rear-end collision, have an autho-

rized Saab dealer inspect the ac-

tive head restraints.

The active head restraints may

not operate in the event the vehi-

cle experiences only a slight im-

pact in the rear.

The active head restraints may be

damaged if they are pushed hard

from behind or subjected to

shock. As a result, they may not

function if the vehicle suffers a

rear impact.

100708

100709

A1910BE-A-GSAAB.book Page 5 Tuesday, September 6, 2005 8:37 AM