Mini 2011 Cooper Convertible User Manual

Page 23

ICA

Watch during the closing process to be
sure that no one is injured. Releasing the

button interrupts the closing process.

Setting confirmation signals

To have the vehicle confirm when it has been
locked or unlocked.

Switch on the ignition, refer to page

Briefly press the button in the turn signal
lever repeatedly until "SET/INFO" is dis-
played.

Press and hold the button until the display
changes.

Briefly press the button repeatedly until the
symbol and "SET" are displayed.

Press and hold the button until the display
changes.

Briefly press the button to select, arrow:

Confirmation signal during unlocking

Confirmation signal during locking

Press and hold the button until the display
changes.

Briefly press the button to select:

The hazard warning flashers light up dur-
ing unlocking/locking.

An acoustic signal sounds during unlock-
ing/locking.

The hazard warning flashers light up and
an acoustic signal

sounds during

unlocking/locking.

The function is deactivated.

Press and hold the button until the display
changes. The setting is stored.

Switching on interior lamps

While the car is locked:
Press the

button.

You can also use this function to locate your
vehicle in parking garages, etc.

Unlocking the liftgate

Press the

button.

When it is opened, the liftgate swings out
and up toward the rear. Make sure that

adequate clearance is available before opening.
To prevent accidentally locking yourself out, do
not place the key down in the cargo area. If the
liftgate was locked before opening, it will be
locked again after it is closed.
Before and after each trip, check that the liftgate
has not been inadvertently unlocked.