Denon S-101 - Manual (Page 53)

50
ENGLISH
System Setup System Setup
ENGLISH
4 Press the CURSOR 0 or 1 button to select
“LOW”, “MID” or “HIGH” for the “ROOM
DAMPING” mode, then press the
ENTER ª
button.
LOW:
Select this for rooms with many hard walls and strong
reverberations (when the treble sound seems strong).
MID (Factory default):
Select this for rooms for which neither “LOW” or “HIGH”
apply.
HIGH:
Select this for rooms with thick curtains and little
reverberation (when the treble sound seems weak).
Setting “RATINGS”
PASSWORD:
Use this to change the password.
The set’s password is set to “0000” by default.
RATING LEVEL:
Use this to restrict playback of adult DVDs you do not want
children to view. Note that even with adult DVDs, viewing
cannot be restricted unless the restriction level is recorded on
the disc.
It is however possible to disable playback of all DVDs.
1
Press the CURSOR 0 or 1 button to select
“RATINGS” icon, then press the ENTER button.
• The “RATINGS” menu screen appears.
2 Press the CURSOR • or ª button to select the
desired setting item, then press the ENTER
button.
3
-2
0 (LOCK ALL):
Select this to disable playback of all DVDs.
Use this for example to disable playback of adult DVDs on
which the rating level is not recorded.
1:
Select this to play only DVDs for children. (Adult and general
audience DVDs cannot be played.)
2 to 7:
Select this to play DVDs for general audiences and children.
Adult DVDs cannot be played.
8 (NO LIMIT) (Factory default):
Select this to play all DVDs.
When “RATING LEVEL” is selected:
Press the
CURSOR • or ª button to select the
desired setting item, then press the ENTER
button.
Press the NUMBER button to input a 4-digit
password, then press the ENTER button.
• The set's password is set to “0000” by default.
The setting cannot be changed without inputting the correct
password.
3
-1
5 Press the CURSOR ª button to select “SETUP
MENU”, then press the ENTER button.
• The “SPEAKER SETUP” screen appears.
6 Press the CURSOR ª button to select “NEXT
SETUP MENU”, then press the ENTER to enter
the setting.
• The next screen in the “SETUP” menu screen appears.