Denon S-101 User Manual

Page 16

ENGLISH

Easy Setup and Operation

ENGLISH

Playing a DVD disc

Check that all connections are correct.

• If

appears on the TV screen while buttons are being

operated, that operation is not possible on the S-101 or with

that disc.

• The disc keeps turning while the menu screen is displayed on

the TV screen.

Disc tray

• Pick up the disc carefully so as not to touch the signal surface and hold it with the labeled side facing up.
• With the disc tray fully open, set the disc in the disc tray.

NOTE:
• Do not press the disc tray in by hand when the power is off.

Doing so will damage it.

• Do not place foreign objects in the disc tray. Doing so will

damage it.

• If a foreign object is caught in the disc tray during closing,

simply press the

button again and the tray will open.

Press the 5

5 button to set the DVD disc in the

disc tray.

Turn on your monitor (TV).
Switch the input selector on the TV to this unit.

The disc tray can also be closed automatically to load the
disc by pressing the

button. After this, playback starts

automatically.

Adjust the volume.

The volume is shown on
the display.

(Main unit)

(Remote control unit)

Press the 5

5 button.

Press the 1

1 button.

VOLUME

ON/STANDBY

VOLUME

ON/STANDBY

MUTE

Press the

ON/STANDBY

switch.

• The power indicator lights orange, the power turns on

and the display lights.

Several seconds are required from the time the ON/STANDBY
switch is pressed until the power turns on. This is due to the
built-in muting circuit that turns off (mutes) the sound when
the power is turned on and off. The power indicator flashes
orange while the muting circuit is activated.
Even when the ON/STANDBY switch has been pressed again
and the power has been set to the standby mode, power is
still supplied to some circuits. When leaving home or
traveling, be sure to unplug the power supply cord from the
power outlet. In the standby mode, the power indicator is
lights red. The indicator is yellow when the timer is set.