Denon RCD-M38 - Manual (Page 22)

ENGLISH
19
Getting Started
Basic Connections
Advanced Connections
Basic Operations
Advanced Operations Advanced Operations
Troubleshooting
Explanation terms
Specifi
cations
Index
Control dock for iPod/iPod® playback
With this unit, you can listen to music on an iPod. It is also possible to
operate the iPod from the main unit or remote control.
“Made for iPod” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifi cally to iPod or iPhone,
respectively, and has been certifi ed by the developer to meet Apple
performance standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory standards.
iPhone, iPod, iPod classic, iPod nano, iPod shuffl e, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
• The iPod may only be used to copy or play content that are not
copyrighted or content for which copying or playback is legally
permitted for your private use as an individual. Be sure to comply
with applicable copyright legislation.
NOTE
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
• Depending on the type of iPod and the software version, some
functions may not operate.
• When connecting an iPhone to this unit, keep the iPhone at least
20cm away from this unit. If the iPhone is kept closer to this unit
and a telephone call is received by the iPhone, noise may be output
from this device.
1 Playback preparation (vpage 17 “Preparations”).
2 Press [REMOTE/BROWSE] to select the display mode.
The mode switches each time the button is pressed.
[Selectable mode] Browse mode Remote mode
Display location Main unit display iPod display
Playable
fi les Audio fi le 3 3
Video fi le 3
Active
buttons
Remote control
and main unit
3 3
iPod® 3
3 Use [ui] to select the item, then press [ENTER/
MEMO] to select the music fi le to be played.
4 Control dock for iPod operation
Press <1/3> or [DOCK 1/3] .
Playback starts.
iPod operation
Press <1/3> or [USB/iPod 1/3] .
Playback starts.
n Remote control and iPod button relations
Remote control
buttons
iPod buttons Operation on this unit
USB/iPod 1/3 13 Play the track / Pause the track.
DOCK 1/3 13 Play the track / Pause the track.
8 , 9 8 , 9
Play the track from the beginning/
Play the next track.
6 , 7
Press and hold
8 , 9
Press and hold
Fast-reverse the track/Fast-
forward the track.
u , i Click Wheel Select an item.
ENTER/MEMO
or p
Select
Enter the selection or plays the
track.
REMOTE/
BROWSE
–
Switch between the browse
mode and the remote mode.
REPEAT – Switch the repeat function
RANDOM – Switch the shuffl e function
o MENU
Display the menu or return to the
previous menu.
n To switch the display
During playback, press [TIME/DISPLAY] .
The display switches each time the button is pressed.
Title name /
Artist name
Title name /
Album name
Disconnecting the iPod
1 Press ON/STANDBY to set the standby mode.
2 Disconnect the iPod cable from the USB port.
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit Button only on the remote control [BUTTON]Symbols used to indicate buttons in this manual<1/3>SOURCEON/STANDBY[uio p]
[FOLDER +, –][ENTER/MEMO][RANDOM]SOURCE[REPEAT][6, 7]
[8, 9][USB/iPod 1/3][DOCK 1/3][TIME/DISPLAY]ON/STANDBY[REMOTE/BROWSE][FOLDER MODE][NUMBER]
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this manual
<1/3>
SOURCE ON/STANDBY
[uio p]
[FOLDER +, –]
[ENTER/MEMO]
[RANDOM]
SOURCE
[REPEAT]
[6, 7]
[8, 9]
[USB/iPod 1/3]
[DOCK 1/3]
[TIME/DISPLAY]
ON/STANDBY
[REMOTE/BROWSE]
[FOLDER MODE]
[NUMBER]