Denon RCD-M38 - Manual (Page 16)

ENGLISH
13
Getting Started
Basic Connections
Advanced Connections
Basic Operations Basic Operations
Advanced Operations
Troubleshooting
Explanation terms
Specifi
cations
Index
CD playback
This section explains how to playback CDs. For details on how to
playback other media, see the sections below.
n MP3 and WMA fi les playback (vpage 18)
n Control dock for iPod/iPod® playback (vpage 19)
n Portable audio player playback (vpage 20)
n USB memory device playback (vpage 20)
Playing CDs
Before you start this operation, perform the procedure in “Before
playing a disc” (vpage 11).
Press < 1 / 3 > or [CD 1 / 3 ] .
The “1” indicator lights and playback begins.
• If the source is set to something other than “DISC”, press [CD 1 / 3 ]
to switch the source to “DISC” and start playback (vpage 23 “Auto
source selector function”).
• The source can also be switched to “DISC” using SOURCE .
n Stopping playback
Press 2 > or [ 2 ] .
n Stopping playback temporarily
Press < 1 / 3 > or [CD 1 / 3 ] .
3 is displayed.
• To resume playback, press
< 1 / 3 > or [CD 1 / 3 ] .
n Fast-forwarding and fast-reversing (searching)
During playback, press and hold in [ 6, 7 ] .
n Moving to the beginning of tracks (skipping)
During playback, press < 8 /– , +/ 9 > or [ 8 , 9 ] .
• The disc skips as many tracks as times the button is pressed.
• When you press reverse once, playback returns to the beginning
of the current track.
n To play the desired track (remote control only)
Press [NUMBER] ( 0 – 9 , +10 ) to select the track.
GExampleH Track 4 : [4]
GExampleH Track 12 : [+10] , [2]
GExampleH Track 20 : [+10] , [+10] , [0]
Playing repeatedly (Repeat playback)
Press [REPEAT] .
Playback in the respective repeat mode starts.
Single-track repeat All-track repeat
Repeat off
(indicator turns off)
[Selectable items]
1 (Single-track repeat) Only 1 track plays repeatedly.
ALL (All-track repeat) All tracks play repeatedly.
Repeat off (indicator turns off) Normal playback resumes.
The repeat playback mode is canceled if you open the disc tray or turn
off power.
Playing random order (Random playback)
1 In the stop mode, press [RANDOM] .
The “RANDOM” indicator lights.
2 Press <1/3> or [CD 1/3] .
The tracks start playing in random order.
If [REPEAT] is pressed during random playback, after the current
session of random playback is fi nished, another session in a different
order of tracks starts.
NOTE
Random play cannot be set or canceled during playback.
n Canceling random playback
While stopped, press [RANDOM] .
The “RANDOM” indicator turns off.
The random playback mode is canceled if you open the disc tray or
turn off power.
Playing tracks in the desired order
(Program playback)
Up to 25 tracks can be programmed.
1 In the stop mode, press [PROG/DIRECT] .
“PGM” is displayed.
2 Use [NUMBER] (0 – 9, +10) to select the tracks.
GExampleH To program tracks 3, 12, 7 to play in that order:
Press [PROG/DIRECT] , [3] , [+10] , [2] , [7] .
3 Press < 1 / 3 > or [CD 1 / 3 ] .
Playback starts in the programmed order.
n Checking the order of the programmed tracks
In the stop mode, press 9 .
The track numbers are displayed in the programmed order each
time the button is pressed.
n To clear the last track programmed
In the stop mode, press [CLEAR/DEL] .
The last track programmed is cleared each time the button is pressed.
n To clear one programmed track at a time
In the stop mode, press 9 to select the track to be cleared, then
press [CLEAR/DEL] .
n Clearing the all programmed track
In the stop mode, press [PROG/DIRECT] .
• If [REPEAT] is pressed during program playback, the tracks are
played repeatedly in the programmed order.
• If [RANDOM] is pressed during program playback, the programmed
tracks are played in random order.
• The program is cleared when the disc tray is opened or the power
is turned off.
Switching the display
Press [TIME/DISPLAY] .
Elapsed time of
current track
Remaining time
of current track
Remaining time for
all remaining tracks
• The display switches each time the button is pressed.