beautypg.com

Tuner playback, Automatically presetting fm stations (auto preset), Tuning in broadcast stations – Denon RCD-M38 User Manual

Page 17

background image

ENGLISH

14

Automatically presetting FM stations
(Auto preset)

This unit can be preset with a total of 99 FM and AM broadcast stations.

NOTE

Auto preset is not possible with AM broadcast stations.

n Auto presetting with the remote control

Perform this operation when tuned to an FM or AM broadcast
station.

1

Press

[MENU]

.

2

Use

[ui]

to select “TUNER SETUP”, then press

[ENTER/MEMO]

or

[p]

.

3

Use

[ui]

to select “FM AUTO PRESET”, then

press

[ENTER/MEMO]

or

[p]

.

4

Press

[ENTER/MEMO]

while “PRESET ENTER” is

fl ashing.

Broadcast stations are preset automatically.

Canceling auto presetting

Press

[TUNER]

,

2>

or

[2]

.

Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.

NOTE

When FM auto preset is performed, the channel currently registered
as the FM preset is deleted, and the newly preset FM broadcast
station is registered to the same number as the deleted channel.

Tuner playback

Tuning in Broadcast Stations

Connect the antenna beforehand (vpage 9).

1

Press

[TUNER]

or

2>

to select the reception

band.

FM AUTO

FM MONO

AM

GAbout the displayH
When “FM AUTO” is selected ........ “AUTO” is displayed.
When “FM MONO” is selected ...... “MONO” is displayed.
When “AM” is selected .................. The reception mode is not

displayed.

2

Use

[TU –, TU +]

to select the reception band.

When a station is received, the “TUNED” indication will light.

• If the function is set to something other than “TUNER”, press

[TUNER]

to switch the function to “TUNER”.

• The function can also be switched to “TUNER” using

SOURCE

.

n To tune automatically

Press and hold in

[TU –, TU +]

to tune in stations automatically.

• Stations whose signal is weak cannot be tuned in.

n To stop auto tuning

Press

[TU –, TU +]

.

A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far from
the TV as possible.

Button located on both the main unit and the remote control

BUTTON

Button only on the main unit

See also other documents in the category Denon CD-players: