Denon RCD-M38 - Manual (Page 14)

ENGLISH
11
Getting Started
Basic Connections
Advanced Connections
Basic Operations Basic Operations
Advanced Operations
Troubleshooting
Explanation terms
Specifi
cations
Index
Before playing a disc
1 Press ON/STANDBY .
2 Press SOURCE to set the input source to “DISC”.
If no disc is loaded “NO DISC” is displayed.
3 Insert a disc (vpage 3).
• Press < 5 > to open/close the disc tray.
• The disc tray also closes when < 1 / 3 > or [CD 1/3] is pressed.
NOTE
Do not place any foreign objects in the disc tray. Doing so could
damage it.
Turning the power off
Press ON/STANDBY .
The power indicator turns off, and so does the power.
NOTE
• Be sure to stop playback before turning the power off.
• Make sure that the disc tray is completely shut before turning off
the power.
• Do not push the disc tray in by hand when the power is turned off.
Doing so could damage the set.
Setting the current time
(12-Hour Display)
GExampleH Setting the current time to 10:15 am
1 Press ON/STANDBY to turn the power on.
2 Press [MENU] .
Various types of setting menus are displayed.
3 Use [ui] to select “CLOCK SETUP”, then
press [ENTER/MEMO] or [p] .
M E N U
C L O C K S E T U P
4 Use [ui] to set the “hours”.
C L O C K S E T U P
A M 1 0 : 0 0
5 Press [ENTER/MEMO] or [ p ].
The “minutes” display fl ashes.
6 Use [ui] to set the “minutes”.
C L O C K S E T U P
A M 1 0 : 1 5
7 Press [ENTER/MEMO] or [p] .
The current time is set, and the normal display reappears.
n Checking the current time when the power is on
Press [CLOCK] .
Press once more and the display returns to its original condition.
n Checking the current time when the power is
set to standby
Press [CLOCK] .
The current time is displayed for 10 seconds.
NOTE
The time cannot be set when in the standby mode. Turn on the power
fi rst.
Operations possible during
playback
Adjusting the master volume
Either turn or press [VOLUME df ] .
The volume level is displayed.
[Adjustable range]
VOLUME 00 – 45, VOLUME MAX
Input source switching
Press SOURCE to select the input source.
AUX1 z1
(AUX1/Dock)
USB
TUNER DISC
PORTABLE IN z2 AUX2
z1 “AUX1/Dock” is displayed when a control dock for iPod is
connected to “AUX1”.
z2 “PORTABLE IN” is only displayed when connected.
Preparations