Lenco MP3 Sportwatch-100 - Manual (Page 21)

R10_20140702
21
a dialog box “Unpair?” appear to confirm. Tap “Yes” icon to confirm, or
“No” to abort.
Bluetooth Function Limitation:
1. Due to the resources control, when you turn the player into Bluetooth
audio transmitting mode, the Video, Picture, Explorer menu etc… cannot be
used.
2. EQ will lock as default effect even you want to change it.
3. Every time power Off the device, Bluetooth will be turned Off for energy
saving. If you want it again, turn On the Bluetooth function after power On
the device.
N. Clock and Interface Display:
This Player can turn to clock watch style if install it into the watchband
(provided). Furthermore, the device will display clock’s time as priority, you
can simply:
 Press or pressing the
button to switch over in the clock and
interface display if you want when the Player is in operation mode.
 If the Player is in dark screen mode (touch screen locked), press once the
button to wake up it from dark and the touch screen is unlocked at
the same time.
 Then press the
button again, or tap the center on screen, to enter
into main menu or current interface display which in using.
Note:
1. Recommended to turn OFF the Player when you not use it for saving the
battery energy, because the player still using certain battery energy if it
still in operation and or dark mode.
(However, the clock time display will
turn into standby mode in 1 minute)
2. For Clock display with power saving mode, In battery fully charged, the
battery can last for 40 ~ 48 hour then the device will turn to Off
automatically and running for clock backup mode (the clock running in
background).
3. When turn to clock backup mode, the battery can last for more than 3
weeks. You need to recharge the battery within this period for maintain
the battery energy.
O. Reset Device
In some circumstances, the device may encounter dead halt during use.
Reset Player by the following method:
 Press and hold the
button for 10 ~ 12 seconds, the device will switch
to “OFF” from hanging screen if it is in operation mode, the player is
reset.
Then again, press the button to turn “ON” the Player for
operation.
 The reset function will working only when the device is in hanging. The