Operation instructions, Mowing with a mulching attachment (continued) – Dixon SilverTip ZTR 72 User Manual
Page 29
OPERATION INSTRUCTIONS
29
MOWING WITH A MULCHING ATTACHMENT
(continued):
7.
Keep the underside of the mower deck clean.
Remove all grass and dirt build-up from the under-
side of the pan, the baffles and deflectors after each
use. Never, under any circumstances, should
you place hands or feet under the mower deck
or in the chute while blades or impeller are still
turning.
8. Alternate mower direction. This will evenly disperse
the mulched grass clippings over the lawn for even
fertilization.
If the mulching quality of the mower does not seem
to be satisfactory, try one or more of the following
tips:
a. Raise the height-of-cut setting on your
mower.
b. It may be necessary to cut your grass
more frequently.
c. Operate the mower at a slower ground
speed.
d. Overlap cutting swaths instead of cutting
a full swath with each pass.
e. Mow across the marginal areas a second
time.
f. CUT HIGH - MOW OFTEN!