Specifications – Dixon SilverTip ZTR 72 User Manual
Page 17
SPECIFICATIONS
17
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
SilverTip™ ZTR® 60” & 72”
CHASSIS:
11 GA - rectangular tube, 7 GA reinforcement
SEAT:
Designed for operator comfort with padded back & arm rests. Seat is
adjustable fore & aft. Mounted on operator suspension system.
MOWER DECK:
2 decks are available. Both decks are made of 10 GA fabricated welded
construction with 1/4 " reinforcement plate. 3 blades combine for either
a 60" or 72" cut width. Deep deck with discharge tunnel. Cut height
approximately 1.5" to 6" via 10 position lift handle.
BLADE DRIVE:
"V" Belt with Electric clutch
DRIVE SYSTEM:
Each rear wheel is independently driven by a Parker pump and wheel
motor.
ENGINE:
27HP Kohler or Kawasaki Twin, Liquid Cooled 4-Cycle, V-
Configuration, Overhead Valve, Gasoline, Horizontal Shaft,
Aluminum Head and Crankcase with Cast Iron Liners, Full
Pressure Lubrication/Full Flow Filter, Fixed Jet Carburetor,
Electronic Ignition, In-Line Fuel Filter, Heavy Duty Canister Air
Cleaner.
STARTING SYSTEM:
Electric by key switch operation with safety interlocks on parking brake,
blade drive clutch and control levers.
TIRES:
Front 13-6.5x6
Rear 24-12x12
RECOMMENDED
Front 16-20 lbs.
TIRE PRESSURE:
Rear 8-14 lbs.
CAPACITIES:
Fuel - 11 gallons (approx)
Hydrostat oil system - 4 quart with in-line 25 micron filter
Hydrostat oil recommendation - Dixon Blue™ 15W50 Synthetic
Hydrostatic Fluid
Engine - 2 quart. SAE 10W30 motor oil
DIMENSIONS:
Width
73.5"(60" Deck), 85.5"(72" Deck)
Height
54"
Length
87"
Weight
1020 lbs.(60" Deck), 1054 lbs.(72" Deck)