Lenco CS-351 BT - Manual (Page 18)

17
OPERATION OPERATION OPERATION OPERATION
���� CONNECT CONNECT CONNECT CONNECT
This unit is built-in auto-reconnection
function. Every time when you short
press
button (4), the unit will auto
reconnect with the mobile phone (note:
the mobile phone must have been
paired with the unit before.).
In the following conditions you can
reconnect
manually by pressing
RECON RECON RECON RECON button (18) for several
seconds, when reconnect is
successful “Conn OK!” will be
displayed.
1) If the mobile phone is out of range,
the connection will be lost, when you
come back to the unit, reconnection is
necessary.
2) When the mobile phone is out of
range from the unit, and there is an
incoming call, when you come back to
the unit, and you want to transfer the
audio to the unit, you need to
reconnection.
3) When you press button (2) to
release the front panel, the connection
will be break off. When you install the
front panel, you need to reconnection.
4) If you turn off the mobile phone that
has paired with the unit, when you
turn on the mobile phone, you need to
reconnection.
���� T-MENU T-MENU T-MENU T-MENU
When successful paired, shortly press
T-MENU
T-MENU T-MENU T-MENU button (6) on the front panel
will enter the telephone menu, keep
pressing this button or press
/
button (1) to change the items in this
menu. The items will be displayed in
the following sequence:
PRE NUM / RECELVED / DIALED /
MISSED / MANUANS / TALK.
The details please see the following
instruction.
1) PRE NUM: You can save 10
phone-call to the phonebook. In PRE
NUM mode. Press
/ button (25)
to select the NUMBER. Then press
SEL button, and enter the phone
number. Then press SEL button again
to save it to phonebook.
2) RECELVED: Display the last call
you have received.
3) DIALED: Display the last dialed
number.
4) MISSED: Display the call you have
missed.
5) MANU ANS（manual answer）
You can set Answer mode to manual
answer (MANU ANS) mode or Auto
Answer (AUTO ANS) mode.
In auto answer mode, when a call
coming
the Phone Number will
appear on LCD. The unit will answer
the call automatically.
In MANU
MANU MANU MANU ANS ANS ANS ANS mode, When a call
coming, the Phone Number will
appear on LCD. you can press
button (4) to answer the call, or press
button (24) to reject the incoming
call.
6) TALK (00~20)
You can set the bluetooth volume in
TALK item. If it is 00, When a call
coming. The main volume will be set
to 60 automatically. If you set the
TALK volume to 20. The main volume
will be set to 100 automatically when
a call coming.