Operation – Lenco CS-351 BT User Manual

Page 10

OPERATION

BASIC

BASIC OPERATION

OPERATION

SWITCHING

SWITCHING ON/OFF

ON/OFF

ON/OFF THE

THE

THE UNIT

UNIT

Press

button (14) to turn on the unit.

When the unit is on, press and hold
button (14) to turn the unit off.

FACEPLATE

FACEPLATE RELEASE

RELEASE

Press

button (2) to detach the

removable faceplate.

SOUND

SOUND ADJUSTMENT

ADJUSTMENT

Shortly press SEL

SEL

SEL/MENU

/MENU

/MENU button (26) to

enter

AUDIO

SETTING

mode,

use

SEL

SEL/MENU

/MENU

/MENU button (26) or

(1) to

select the desired adjustment mode. The
adjustment

mode

will

change

the

following order:
Bass/Treble/Balance/Fader/Sub-woof/ON/
OF(Exit)
Shortly press / (25) to adjust the sound
quality up or down step by step, press and
hold / (25) will change the sound quality
continuously.
Shortly press MUTE

MUTE

MUTE button (14) will mute

the sound, press it again will resume the
sound.

LOUDNESS

Press

LOUD

button

(24)

for

several

seconds to switch loudness function on,
and “LOUD” will appear on the LCD. Press
it for several seconds again to release this
function, and “LOUD” will disappear.

DISPLAY

Press DSP

DSP

DSP button (19) to change display

mode.

EQUALIZATION

Press E

Q button (22) shortly to turn on

equalization function and to select desired
audio mode. There are five kinds of mode
as below:

FLAT→CLAS→POP M→ROCK→DSP OFF

RESET

RESET FUNCTION

FUNCTION

RESET

RESET button (23) must be activated with

either a ballpoint pen or thin metal object.
The RESET

RESET

RESET button is to be activated for the

following reasons:

Initial installation of the unit when all
wiring is completed.

All the function buttons do not operate.

Error symbol on the display.

Note: if press RESET

RESET

RESET button (23), the unit

can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.

MODE

MODE SELECTION

SELECTION

Shortly press MOD

MOD

MOD button (5) to change the

mode among: Radio, CD, USB, CARD,
IPOD (optional), AUX and BT Audio.

SYSTEM

SYSTEM SETTING

SETTING

Press and hold MENU

MENU

MENU button (26) on the

front panel to enter SYSTEM SETTING
mode. There are below items for you to
adjust.

BEEP / P-VOL / AREA / HOUR 24H / PCLK

Use SEL

SEL

SEL button (26) or

(1) to select

the item you want to change, and use

(25) to change the corresponding

setting.

1) BEEP: ON/OFF

To turn the beep sound on/off when
pressing the buttons on the front panel

2) P-VOL Select

P-VOL: The max volume value when you
turn on the unit. Such as when you set
the P-VOL to 40. If the volume value is
small than 40 when you turn off the unit.
Next time you turn on the unit. The
volume will keep the last volume value.
But if the volume value is large than 40
when you turn off the unit. Then next time
you turn on the unit. The volume value
will back to 40.

3) Area: Use

(25) button. You can