Operation – Lenco CS-351 BT User Manual

Page 11

OPERATION

set

the

radio

frequency

Europe

frequency or USA frequency.

4) HOUR 24/12

You can select time format to 12 hour or
24 hour format. (In AREA item. When you
change the radio frequency to the EUR.
The time format will be changed to 24
HOUR format automatically.

When you

change the radio frequency to the USA.
The time format will be change to 12
HOUR format automatically.)

5) PCLK ON/OFF: no function.

AUXILIARY

AUXILIARY INPUT

INPUT

The unit can be connected to a portable
audio player through the AUX

AUX

AUX IN

IN jack (30)

on the front panel. After finishing the
connection, you can press MOD

MOD

MOD button (5)

on the front panel to switch the mode to
AUX IN mode.

RADIO

RADIO OPERATION

OPERATION

SELECTING

SELECTING THE

THE

THE FREQUENCY

FREQUENCY

FREQUENCY BAND

BAND

At radio mode, press BND

BND

BND button (24)

shortly to select the desired band.
The reception band will change in the
following order:

FM1 / FM2 / FM3 / AM

SELECTING

SELECTING STATION

STATION

Shortly press

buttons (1) to activate

automatic seek function. Press for several
seconds until “MANUAL……” appears on
the display, the manual tuning mode is
selected. If both buttons have not been
pressed for several seconds, they will
return

seek

tuning

mode

and

“AUTO……” appears on the display.

AUTOMATIC

AUTOMATIC MEMORY

MEMORY

MEMORY STORING

STORING

STORING &

PROGRAM

PROGRAM SCANNING

SCANNING

Automatic memory storing
Press AS/PS

AS/PS

AS/PS button (20) for several

seconds “SEARCH” will appear on LCD.
the radio will search from the current
frequency and checks the signal

strength until one cycle search is
finished. And then 6 strongest stations
are stored into the corresponding preset
number button.

- Program scanning

Press A

AS/PS

S/PS

S/PS button (20) shortly to scan

preset station. And the corresponding
station number P1~P6 will flash on LCD.

SCAN

CAN

Press SCAN

SCAN

SCAN button (18) to enter scan

mode, the unit will scan to higher frequency
station and keep on each station for several
seconds (the corresponding frequency will
flash 5 times on LCD).

STATION

STATION STORING

STORING

Searched a station press preset button (1-6)
for several seconds (until 2’nd beeps come
out), current station is stored into the
number button.

RDS

(RADIO

DATA

SYSTEM)

OPERATION

Setting RDS mode

Press

button

(21)

and

release

immediately to switch on or off RDS
mode.
Whenever RDS is switch on, “RDS” will
flash on LCD.

USE PT

PTY

Y BUTTON (17)

1) Shortly press PTY

PTY

PTY button (17) will

enter

PTY

SELECT

mode,

the

program name will be displayed on
the LCD, you can use

(25) to

select the items and press

buttons (1) to begin search the
corresponding program.

2) Press and hold PTY

PTY

PTY button (17) will

enter RDS MENU, in the menu, use

(25) to select the items and

press

buttons (1) to adjust

corresponding item.

There are below items for you

adjusting: