Lenco CS-351 BT - Manual (Page 13)

12
OPERATION OPERATION OPERATION OPERATION
EONTA: EONTA: EONTA: EONTA: DX/LO (DISTANCE/LOCAL):
The purpose of this key is to reduce
unwanted EON TA switching, which
EON TA information was received from
current station and the radio switched to
that
EON linked station, but no
information could not be received
because the EON linked station is
located too far from that area. So the
radio is switched back to current station
again. In above operation, a customer
listens to a wrong program or mute
sound for a while.
EON TA LOCAL mode
When the filed strength level of EON
linked is less than threshold level, the
radio does not switch that station, and a
customer can hardly listen to any
disturbances.
When EON TA LOCAL mode is selected,
“EON TA LO” on numeric display is
indicated for a few seconds.
EON TA DISTANCE mode
EON TA switch is tried to implemented
by the information of current station.
When EON TA DISTANCE mode is
selected, “EON TA DX” on numeric
display is indicated for a few seconds
TA-VOLUME: TA-VOLUME: TA-VOLUME: TA-VOLUME: Volume 30 (the default TA
volume value is 30, you can adjust it
from 0 to 100).
REG REG REG REG (REGION):::: OFF/ON
REGION ON mode: AF switching or PI
SEEK is implemented to the station
which have all PI codes are the same as
current station.
REGION OFF mode: The regional code
in the format of PI code is ignored when
AF
switching or PI SEEK is
implemented.
---- Listening Listening Listening Listening to to to to Traffic Traffic Traffic Traffic Announcement Announcement Announcement Announcement
TA TA TA TA button (22) is operated as follows:
When pressed and held for several
seconds, it is engaging whether TA TA TA TA
mode on or off.
When TA TA TA TA mode, is on and a traffic
announcement is transmitted:
When the unit was in CD (MP3) mode
or AUX IN mode or IPOD mode, it will
switch temporarily to radio mode.
Temporary switch over to an EON linked
station when EON detects a traffic
announcement on that other program.
If the volume level was under the
threshold point it will be raised to the
threshold point. But the user changed
the volume level, which was more than
the threshold point (min. TA
TA TA TA volume
level), it will be set to the last level.
When TA
TA TA TA mode is on, TA TA TA TA of individual
segment is turned on.
When a TP station is received, TP of
individual segment is turned on.
TA
TA TA TA interruption function
The current traffic announcement is
cancelled by pressing this key.
But the TA
TA TA TA mode will not be off.
The RDS data used are the PI, PS, AF,
TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast station name data
expressed in alphanumerically
characters
AF: Alternative Frequencies
Frequency list of broadcasting
stations transmitting the same
program
TP: Traffic Program Identification
Identification data for traffic
information-broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic
information is being transmitted or
not