Naim Audio UnitiServe - Manual (Page 16)

14
Operation - The Display Inter face
Encoding Queue: Selecting Encoding Queue displays MP3,
FLAC or WAV file format conversion activity. File format
conversion can also be cancelled from the Encoding
Queue screen.
4.8.5 System Settings
Selecting System Settings from the System Setup Menu
provides access to the UnitiServe system settings and
functions. To change a parameter select it followed by
the
change button. Once the system settings have been
configured they can be saved by selecting the save
button.
System Settings Menu
Language
Display Settings
Calibrate Display
Date And Time
Clean Display
Rip or Play Mode
Language: The UnitiServe Front Panel Display, External
Display and Web interfaces can operate in a variety of
languages. Selecting Language enables the interface
language to be changed.
Display Settings: Provides access to a number of
parameters that configure UnitiServe and its interface with
any external display screen.
NaimNet Switch: Select to enable access to a NaimNet
system if one is connected to the UnitiServe. A NaimNet
button will then be present on the right hand side of
the interface display if a NaimNet system is available.
Screensaver: Select to engage external display
screensaver and specify its switch on delay.
External Display Theme: Enables the appearance of
any external display to be changed. Black and Silver
options are available.
External Display Aspect: Selects the video aspect ratio
for the External Display Interface.
External Display Mode: Selects the interface mode for
the External Display (either Touchscreen or Remote).
In Touchscreen mode the interface displays shortcut
buttons that correspond to the
home , browse , find and
back keys on the handset.
TV System: Selects PAL or NTSC TV video modes for the
external display.
Scroll Drag Mode: Enables selection of Page and Initial
letter modes for the display scroll function. With Initial
Letter selected, screen scrolling is indicated by initial
letters displayed at the top of the screen. With Page
selected, screen scrolling is indicated by page numbers
displayed at the top of the screen.
Screen Lock: Enables the UnitiServe display settings
menu to be locked and password protected.
Calibrate Screen: Enables calibration of any USB
connected external touch screen. Touch Calibrate Screen
and follow the on-screen instructions.
Note: If the touch screen in use is so far out of calibration
that it is unusable, a USB or PS2 mouse can be connected
temporarily in order for the calibration routine to be carried
out.
Date and Time: Enables the UnitiServe internal clock and
calendar to be set.
Clean Display: Disables any external touch screen for 30
seconds so that it can be cleaned.
Rip or Play Mode: Selecting Rip or Play Mode displays a
menu that provides the option for the UnitiServe to play a
CD rather than ripping it.
To play a CD in Play Mode , open the UnitiServe
drawer and insert the CD. The CD will begin playback
automatically. The Current Playlist menu will list the tracks
on the CD as if it were a playlist. Use either the handset
transport keys or those in the Now Playing screen to
play ( ), pause ( ), stop ( ), step forward ( ) or step
backwards ( ).