Naim Audio NaimUniti 2 - Manual (Page 25)

23
NaimUniti 2 Specifications
10 NaimUniti 2 Specifications
Audio Outputs: Speaker output
Line output (L+R RCA)
Sub output (2 Mono outputs via RCA)
Preamp output (4-pin DIN)
Line Output: 275mV, 600Ω
Preamp Output Load: 10kΩ minimum
Frequency Response: 20Hz - 50 kHz
Signal to Noise Ratio: 80dB
CD Phase Response: Linear phase, absolute phase correct
Power Output: 70WPC into 8Ω
110WPC into 4Ω
Other Outputs: Headphone, 3.5mm jack
Antenna Input: F type
Analogue Inputs: 3.5mm front panel jack
3 x RCA pairs
1 x DIN with power to support a Naim phono preamplifier
Digital Inputs: 5 x S/PDIF (2 x optical TosLink, 2 x coaxial, 1 x 3.5mm mini-
TosLink)
Analogue Input Overload: 27 dB (RCA connections) (Phono and Front panel: 33.8 dB)
USB: Front panel socket. Power output: 1A maximum at 5V DC
Other Inputs: Ethernet
Remote Input: Rear panel, RC5
Upgrade Interface: Rear panel mini-USB
Audio Formats Supported: Internet radio (Windows Media-formatted content, MP3
streams, MMS)
Playlists (M3U, PLS)
MP3, AAC (up to 320kbit/s, CBR/VBR), ALAC
Windows Media-formatted content-9 (up to 320kbit/s)
WAV and FLAC (up to 24bit/192kHz via UPnP or USB only)
AIFF, LPCM 16/24, Ogg Vorbis
CD Compatibility: Red Book and CD-R
Supply Voltage: 100V, 115V or 230V, 50/60Hz
Quiescent Consumption: 35 Watts
Dimensions (H x W x D): 87 x 432 x 314mm
Weight: 11.7kg
Shipping Weight: 14.4kg
Shipping Dimensions: 240 x 590 x 500mm
(H x W x D)
Finish: Black
Naim Audio Limited, Southampton Road, Salisbury, England SP1 2LN
Tel: +44 (0)1722 426600 Fax: +44 (0)871 2301012 W: www.naimaudio.com
Part No. 12-001-0081 Iss. 6C