6 naimuniti cd player, 1 disc loading, 2 cd transport control – Naim Audio NaimUniti 2 User Manual

Page 19: 3 cd display and track selection, 4 cd track playlist programming, Naim uniti 2 cd player, 6 naimuniti 2 cd player

6.1 Disc Loading

To load a CD pull open the drawer using the handle on
the left hand side of the unit. Place the CD on the platter
followed by the magnetic puck. Do not use a puck from
any other Naim CD player. Different Naim CD players use
dissimilar pucks. Push the door closed.

NaimUniti 2 will automatically read the disc index when
the CD drawer is closed. If

Auto Select

is specified in the

CD setup menu (see Section 4.3.1) NaimUniti 2 will switch
automatically to the CD input. If

Auto Play

is specified the

CD will begin to play from track one immediately.

6.2 CD Transport Control

CD transport (play, stop, etc.)
can be controlled from either
the front panel transport buttons
-

play

prev

next

stop

- or from

the remote handset transport
keys ( ).

Note:

To engage or disengage pause using the front panel

controls press play.

6.3 CD Display and Track Selection

When a CD is loaded NaimUniti
2 will display its total playing time
and number of tracks.

If CD auto play is engaged
the CD will begin playing
immediately. During play the
display will show the track number and its elapsed time.
The stop icon at the top of the display will change to a
play icon.

In either play or stop mode CD tracks may be selected
either by using the front panel

prev

and

next

buttons or the

handset

prev

and

next

keys. Tracks may also be selected

by entering the track numbers using the handset

numeric/

text

keys.

To repeat an entire CD (or
programmed running order) press
the handset

repeat

( ) key. To

shuffle (randomise) track order
press the handset

shuffle

( )

key.

Pressing the front panel or handset

ok/list

key will switch

the display to list mode where the CD tracks and their
individual running times are listed. Tracks can be selected

NaimUniti 2 CD Player

6 NaimUniti 2 CD Player

NaimUniti 2 incorporates a fully featured CD player based on established Naim practice
using a manual swing-out loading drawer, custom transport control software and unique
digital and analogue electronics. Select the NaimUniti 2 CD input to begin using the CD
player.

CD Play List
Program...
4

1 6:42

2 4:20
3 3:56

to play by scrolling up and down the list using the handset

(

) and

down

(

) keys and pressing the

ok/list

key.

Above the track list in the display is a

Program

command.

Select Program to alter the CD running order and to
suppress or repeat tracks.

6.4 CD Track Playlist Programming

Selecting

Program

from a CD

track list opens the

Modify

Program

menu. Selecting

New -

All tracks

creates a track playlist

containing all the tracks on the
currently loaded CD and opens
the

Program

menu. Selecting

New - No tracks

creates an empty playlist and opens the

Select to Add

menu.

Edit

and

Clear

are only displayed

if there is an existing playlist.

Edit

opens the

Edit

Program

menu while

Clear

deletes the existing playlist.

Note:

If the desired playlist contains the majority of the

tracks on the CD select “New - All tracks” and delete
the unwanted tracks. Alternatively, if the desired playlist
has just a couple of tracks from the CD select “New - No
tracks” and add the desired tracks.

Note:

CD play will stop if the Modify Program menu is

selected while play is underway.

The

Program

menu displays a

list of track numbers in the left
hand column and their individual
running times in the right hand
column. The order of the track
numbers, top to bottom, reflects
the order in which they will play.

If the menu has opened as a
result of selecting

New - All

Tracks

the columns will reflect the

track sequence of the currently
loaded CD. If it has opened as
a result of selecting

New - No

Tracks

only

Select to Add

will be displayed.

To delete CD tracks after
selecting

New - All Tracks

, use

the handset

(

) and

down

(

) keys to scroll to the first track

to be deleted (track 3 in the

Program

menu illustration) and

press the

ok/list

key. The

Edit

Program

menu will open to confirm the deletion.

Modify Program

1/4

New - All Tracks

New - No Tracks
Edit
Clear

Program [56:22]

3/8

1 02:34
2 04:20
4

3 03:17

4 07:21

Program [00:00]

1/1

Select to Add

Edit Program

1/1

Delete Track 3

44:47

12 Track CD

01 01:32