7 the front display menu, 8 the clock and alarm menu, Naim uniti 2 setup – Naim Audio NaimUniti 2 User Manual

Page 15

NaimUniti 2 Setup

type of security feature is known as ‘MAC address filtering’.
The NaimUniti 2 MAC address is shown in the ‘Factory
settings > System Status’ page.

Note:

The wireless passphrase/access key is created when

the wireless router is first set up and could be a word or a
series of numbers and letters. If the passphrase/access key
is not known, check on the router settings page or with the
person who initially set up the router.

Note:

If a router offers multiple security configurations,

NaimUniti 2 will automatically offer only the most secure
one.

Note:

If WEP security is used the router should be set to

“auto” or “open” authentication.

If the selected network is insecure
and requires no passphrase or
access key to join, NaimUniti 2 will
display an alert message. Pressing
the handset

ok/list

key will

immediately connect NaimUniti
2 to the network and display a
confirmation screen.

Note:

Wireless connection difficulties can sometimes be

resolved by changing the wireless connection channel in
the router settings.

4.6.2 Non-DHCP (Static) Network
Connection

DHCP

is de-selected in the

Network Settings menu, five
further parameters will be
displayed.

Parameter Options

User definable (numerical entry)
Default: 0.0.0.0

Mask:

User definable (numerical entry)

Default: 0.0.0.0

Gateway (Gtwy):

User definable (numerical entry)

Default: 0.0.0.0

DNS1:

User definable (numerical entry)

Default: 0.0.0.0

DNS2:

User definable (numerical entry)

Default: 0.0.0.0

These settings enable NaimUniti 2 to connect to a network
using a fixed IP address. On selecting each one in turn,
numerical entry screens will be displayed that require
completion with the appropriate network IP address
settings. Consult your network router’s user documentation
for help with specifying fixed IP address settings.

4.7 The Front Display Menu

The Front Display setup menu
enables the behaviour of the
NaimUniti 2 front panel display
to be modified. The options are

tabulated and described in the following section:

Parameter Options

Off During Mute:

Yes / No

Auto Off:

Select time from list

Clock When Off:

Yes / No

Logo Off:

If Muted / If Display Off / Always / Never

When

Off During Mute

is selected the front panel display

will switch off when mute is engaged.

Auto Off

defines the

length of time the display will remain switched on after
the last interface operation is carried out. Time periods of
between 10 seconds and 1 hour can be selected.

Note:

If the display has been switched off using the

handset disp key this setting will take priority over the Auto
Off setting. The display will always switch on briefly when
control commands are received.

The

Clock When Off

settings enables the clock to remain

displayed when other display settings are switched off.

Note:

If Clock When Off is set to “Yes” and Logo Off is set

to “If Muted”, the clock display will dim automatically 10
seconds after mute is selected.

The

Logo Off

settings select the circumstances in which the

front panel logo illumination will switch off.

4.8 The Clock and Alarm Menu

The Clock & Alarm setup menu
enables the NaimUniti 2 clock
to be set and alarms to be
configured.

Selecting

Set Weekday Alarm

Set Weekend Alarm

opens a

menu that offers the following parameters and options:

Parameter Options

Enabled:

Yes / No.
Selecting

Yes

primes the
alarm. Selecting

disables the

alarm.

Alarm Time:

07:00. Selecting the time opens a screen
that enables the alarm time to be set by
using the remote navigation (

5 6 3

) and numeric keys.

Input:

NaimUniti 2 external inputs or radio presets
can be selected to become the alarm
audio source.

Note:

The NaimUniti 2 radio can only be used as an alarm

signal using stored radio presets.

Volume:

30. The alarm audio volume can be set
independently of the default NaimUniti 2

volume using the remote handset

(

) and

down

(

) keys.

Weekday alarms operate on Mondays to Fridays. Weekend
alarms operate on Saturdays and Sundays.

Front Display

1/4

Off During Mute:

Auto Off:

2 mins

Clock When Off:

Yes

Logo Off:

If Muted

Network Settings

1/5

IP: 192.168.0.80

Mask:

255.255.255.0

Gtwy:

192.168.0.1

DNS1: 192.168.0.1

This wireless network is
insecure and requires no
passphrase or access key.

Press OK To Connect

Clock & Alarm

1/5

Set Weekday Alarm

Set Weekend Alarm

Adjust Time Zone
Resync Time From Net

Weekday Alarm

1/4

Enabled: No

Alarm Time:

07:00

Input:

Fluid Radio

Volume: