Nexen LSCC-44 923632 - Manual (Page 4)

FORM NO. L-21099-G-1209 4
GeneraL SPeCIFICaTIOnS
GeneraL SaFeTy PreCauTIOnS
WARNING
This product is capable of emitting
a spark if misused therefore is not
recommended for use in any explosive
environment.
CAUTION
This product has possible pinch
points. Care should be taken when
interacting with this product.
Specifications
Torque: Up to 452 Nm ( 4000 in-lbs)
Actuation Pressure: 1 - 5.5 bar (14.5 - 80 psi)
Service Temperature: 4.5 - 104 C (40 - 220 F)
Approximate Weight:
Up to 11.8 kg (26 lbs)
CAUTION
Use appropriate guarding for moving
components. Failure to guard could
result in serious bodily injury.
CAUTION
Watch for sharp features when
interacting with this product. The
parts have complex shapes and
machined edges.
WARNING
Ensure proper guarding of the product is used.
Nexen recommends the machine builder
design guarding in compliance with OSHA 29
CFR 1910 “Occupational Safety and Health
Hazards”.
CAUTION
Surface temperature may exceed
safe handling limits during
operation. Do not touch.
CAUTION
Use appropriate guarding for moving
components. Failure to guard could
result in serious bodily injury.
CAUTION
This product has possible pinch
points. Care should be taken when
interacting with this product.