D-Link DCS-1000W - Manual (Page 83)

83
Xplug Control Installation
Installation to a Web Server
It is highly recommended to install the Xplug Control application to the
Web Server for IE 5.0. It must be installed to a Public Domain with a
Fixed IP address.
Important Information
1. Installation:
Copy the “xplug.ocx” file to any Web Server table. Note the web address
of the file location so that you can use it in the next step.
2. Configuration:
From the Web Configuration menu select “System” and under the
“Loading ActiveX From” input web server location
(http://www.web server location.com/).
Once the settings are completed you should now be able to access the Internet
Camera from the web browser by selecting ActiveX mode.
Note:
Set your browser security level to “Low” so that your browser will allow ActiveX
control of the camera.