beautypg.com

Eg 1•2•3 hidden fastener – TAMKO Evergrain User Manual

Page 4

background image

EG 1•2•3 Hidden Fastener

Installation Instructions

Place fastener tight against board edge with spacing tabs pointing

downward. Slide fastener along edge of board until the pencil mark

runs through the center of hole B while allowing hole A to extend

over the board. Secure fasteners on both sides of board using board

screws.

CAUTION: Use low torque setting to avoid spinout.

Once fasteners are attached, flip deck board back over. Position board

so fasteners slide beneath the lead edge of the previous board.

Once proper spacing is confirmed (1/8" spacing is integrated into the

fastener), attach deck board to frame using a joist screw through hole

A of each fastener.

Repeat steps 4-6 until reaching final deck board.

STEP 5.

POSITION DECKING BOARD

STEP 6.

SECURE DECKING BOARD

STEP 7.

INSTALLING FINAL BOARD

45º Installation Instructions - continued

STEP 4.

INSTALLING THE NEXT BOARD - continued

Depending on your deck design, completion of your 45º installation

can be achieved by following Steps 1 and 2.

09/20/12 ©2012 TAMKO Building Products, Inc. TAMKO and EverGrain are Registered

Trademarks of TAMKO Building Products, Inc.

TAMKO Building Products, Inc.

P.O. Box 1404, Joplin, Missouri 64802

• Technical Services: 800-641-4691

• Warranty Services: 800-441-7190

• Customer Service: 800-253-1401

These application instructions were current at the time of printing.

To obtain a copy of the most current version of the application instructions,

visit us online at evergrain.com or call us at 800-641-4691.

41000281

LIMITED WARRANTY

TAMKO Building Products, Inc. provides a 20-year limited warranty

for the EG 1-2-3 Hidden Fastener installed in accordance with

these written instructions. For a copy of the limited warranty see

your EverGrain Dealer or visit evergrain.com. Returns of or claims

for the EG 1-2-3 Hidden Fastener due to any condition that was

clearly apparent prior to application/fastening of product, will not be

considered after the fasteners have been applied/fastened to deck

board, sub-structure, joist, etc.

JP60855

This manual is related to the following products: