TAMKO AWAPLAN - Manual

DESCRIPTION
AWAPLAN is reinforced with a 180 g/m 2 nonwoven polyester mat saturated with asphalt and coated on
both sides with SBS rubber modified asphalt and surfaced with ceramic granules for protection from
ultraviolet degradation.
TYPICAL PHYSICAL PROPERTIES
Tensile Strength MD = 138 LBF/IN
(@0 deg F & 0.08 in/min) CD = 98 LBF/IN
Elongation MD = 30%
(@0 deg F & 0.08 in/min) CD = 35%
Tear Resistance MD = 137 LBS
CD = 100 LBS
Low Temp Flexibility MD ≤ 0 deg F
(PASS) CD ≤ 0 deg F
Tests were conducted using ASTM D 5147 test methods.
CERTIFICATIONS
U.L. Classified Membrane for Roofing Systems
FM Approved**
ASTM D 6164, Type I
Florida Building Code Approved
ICC-ES ESR-1013
**Refer to Factory Mutual Approval Guide
FEATURES
Excellent performance characteristics over a broad temperature range:
• Elongation and flexibility
• Puncture and tear resistance
• Tensile strength
• Dimensional stability
• Granule loss resistance
• Resistance to foot traffic
• Compound stability at high temperature
Retains flexibility, elongation and tensile strength after heat conditioning
Excellent nail pull-through characteristics
Cold adhesive or hot asphalt application
15-Year Limited Warranty*
PRODUCT DATA
JP70419 02/10/15
PRODUCT DATA 1
Reinforcement 180 g/m 2 Polyester Mat
Asphalt Modifier SBS
Roll Weight 92 lbs (41.7kg)
Roll Size 33' 5" x 39-3/8" (10.2m x 1m)
Product Thickness ≥ 141 mils
WHEN APPLIED ACCORDING TO INSTRUCTIONS,
ONE SALES SQUARE COVERS 98.52 SQUARE FEET
ROLL CONTAINS
109.65 SQUARE FEET
1 All values stated as nominal
AWAPLAN TM
Polyester Reinforced SBS Modified Roofing Membrane
USES
Product is designed for use as a roofing membrane and flashing membrane in flashing detail installations.
Easily applied by mopping in hot asphalt or cold adhesive referenced in TAMKO ® installation instructions † .
CAUTION: This product contains crystalline silica. Crystalline silica has been classified as a "known" human carcinogen by the International
Agency for Research on Cancer (IARC) and the National Toxicology Program. This product also contains oxidized asphalt. Occupational
exposures to oxidized asphalt and its emissions during roofing have been classified by IARC as a "probable human carcinogen". Oxidized
asphalt also contains Polycyclic Aromatic Hydrocarbons some of which have been classified by IARC as know or probable human
carcinogens. The physical nature of this product may help limit any inhalation or dermal hazard during application and/or removal. However,
physical forces such as sawing, grinding or drilling during demolition work and heating or burning may increase the inhalation or dermal
exposure hazard of this product. Take precautions to prevent breathing and contact with skin.
Use of this product in "torch applied" or "hot mopped" applications may expose workers and others in the work area to oxidized
asphalt and its emissions. The International Agency for Research on Cancer has classified occupational exposures to oxidized
asphalt and its emissions during roofing as a "probable human carcinogen." During installation and removal of this product,
including "torch applied" or "hot mopped" application, workers must take precautions to assure adequate ventilation and use
effective personal protective equipment to prevent exposures to dusts, fumes, vapors and mists. It is the responsibility of the
contractor and workers to protect themselves and others in the work area from exposure to oxidized asphalt and its emissions
when applying this product.
* See complete Low-Slope Roofing Products Limited Warranty at tamko.com for details
† Certain cold adhesive specifications require heat welding of the laps.