Volvo 2009 C70 - Manual (Page 239)

10 Audio
Radio functions
10
}}
239
Radio function controls
1. AM/FM1/FM2 selection
2. Station preset buttons
3.
TUNING dial for selecting radio stations
4. SCAN
5. MENU NAVIGATION CONTROL–press
the up or down arrow keys to scroll in a
menu, or the keys on the left/right sides of
the control to search for or change radio
stations/CD tracks
6. EXIT–press to cancel a menu selection or
a selected function
7. AUTO–search for and store the strongest
radio stations in the area in which you are
driving
Searching for stations
There are two ways to manually tune a radio
station:
1. Turn the
TUNING dial (3) to the desired fre-
quency.
2. Press the left or right arrow key on the
MENU NAVIGATION CONTROL and
hold it down. The radio scans slowly in the
selected direction and will increase the
scanning speed after a few seconds.
Release the button when the desired fre-
quency appears in the display.
The frequency can be fine-tuned by short
presses on the left/right arrow keys.
Storing preset stations
Manually storing a station
1. Tune to the desired station.
2. Press and hold the preset button under
which the station is to be stored. The audio
system sound will be interrupted for a few
seconds and
STATION STORED will
appear in the display.
NOTE
A total of 30 stations can be stored; 10 sta-
tions each in AM, FM1 and FM2.
Automatically storing a station
Pressing AUTO (7) automatically searches for
and stores up to ten strong AM or FM stations
in a separate memory. If more than ten stations
are found, the ten strongest ones are stored.
This function is especially useful in areas in
which you are not familiar with radio stations or
their frequencies.
To use the AUTO function:
1. Select a waveband using the
AM/FM but-
ton (1).
2. Start the search by pressing AUTO until
AUTO STORING appears in the display.
When the search is completed, AUTO
STORING will no longer be displayed. If there
are no stations with sufficient signal strength,
NO AST FOUND is displayed.
The auto-stored stations can be selected using
the preset buttons (2).
Press
EXIT (6) to terminate the automatic stor-
ing function.
When the radio is in auto-store mode, AUTO is
shown in the display. AUTO disappears when
you return to normal radio mode, which can be
done by briefly pressing
AM/FM (1), EXIT (6),
or AUTO (7).