Volvo 2009 C70 - Manual (Page 219)

09 Maintenance and servicing
Replacing bulbs 09
}}
219
High beam bulb
Halogen high beam bulb
1. Open the hood.
2. Remove the headlight housing (see
page 217).
NOTE
The halogen high beam bulb has a different
socket on vehicles equipped with Bi-
Xenon
® headlights. On these models, pull
the bulb straight out.
WARNING
Bi-Xenon ® headlights (option) – due to the
high voltage used by these headlights, the
Bi-Xenon
® bulbs should only be replaced by
a trained and qualified Volvo service tech-
nician.
3. Driver's side headlight: Turn the bulb
holder counterclockwise.
Passenger's side headlight: Turn the bulb
holder clockwise.
4. Pull out the bulb holder and replace the
bulb.
5. Reinstall the bulb holder. It can only be
installed in one position.
6. Reinstall the headlight housing (see
page 217).
Parking light bulb
1. Pull out the bulb holder with a pair of pliers.
The bulb holder should not be pulled out
by the wire.
2. Replace the bulb.
3. Press the bulb holder back into place. It
can only be installed in one position.