XAIRCRAFT STELLA - Manual (Page 5)

3 ©2013 XAircraft 版权所有
Interface
IO Function
P S-BUS Receiver: Not connected.
Standard Receiver: Camera pitch control
S S-BUS Receiver: Camera full control via SBUS when transmitter can access 11 or more channels.
Standard Receiver: Control Modes of STELLA
V Video Output, used for OSD or video transmitter. The signal pin is the video signal output.
B Battery, LIPO
（3S~6S, 11.1V~22.2V）
Control Mode
Mode Function
Speed Mode This is the default mode of STELLA. STELLA will keep rotating if you have pitch or roll controlled
from transmitter, and it stops rotation when the radio input is returned to a neutral position or
STELLA reaches its configured maximum angle.
Position Mode STELLA rotates to a certain angle from the radio input. When the input is at a neutral position,
STELLA returns to the initial position.
90
° Pitch
STELLA rotates 90 deg, aiming GoPro to the ground or vertically to the sky.
When STELLA works under this mode, speed mode and position mode are disabled.