Stella overview, Features, Specifics – XAIRCRAFT STELLA User Manual
Page 4

2
©2013 XAircraft 版权所有
STELLA Overview
Features
Different versions of firmware may support different functions. The main features are listed below:
Two types of installation is supported: Standard (hanging) or upright
Control Mode: Speed Mode and Position Mode.
90° Pitch Switch.
Built-in GoPro USB connector, transferring the video signal to OSD or video transmitter.
Built-in BEC charges the GoPro in the air.
Built-in green configuration software. No drivers required. Easily upgrade the firmware and software via PC.
Specifics
Features
Description
Camera
GoPro Hero3 / GoPro Hero 3+
Wind-resistance
<8m/s (17.9mph / 28.8km/h)
Max. Remote Control Angle
Roll -10
°~10°
Pitch -110
°~20°
Attitude Precision
0.08
°
Environment Temperature Limits
-10°C ~ 55°C
Remote Controller
Standard Receiver with minimum 9 channels or S.BUS Receiver for full
function access (Note SBUS and SBUS2 require a transmitter with at least 11
channels for full use of Stella's features whilst flying)
Configuration Software
Windows System only
Electrical Specifications
Voltage
:DC 10.5V~22.2V (3S – 6S)
Power consumption:
Max. 10.2W
([email protected])when charging the GoPro
Normal 3.0W
Weight
120g / 195g (with GoPro onboard)
Dimension
(Max.)
83.5mm
×83.5mm×92.5mm