Firmware and configurator upgrade – XAIRCRAFT STELLA User Manual

Page 13

Firmware and Configurator Upgrade

1. Connect STELLA to your computer to get the UID in the ‘About’ tab of your configuration software.

2. Open the STELLA upgrade webpage

（http://www.xaircraft.com/stella/upgrade/）, paste the UID into the text

box and submit:

Then download both firmware and software files.

3. Copy both firmware (stella.xfw) and software (Stella.exe) to the root of STELLA:

Your computer system may prompt you to confirm you wish to overwrite the STELLA.exe, select YES.

4. Eject the STELLA disk from your computer.

5. Disconnect the power to STELLA to allow the upgrade to take hold.

6. When the upgrade is complete and STELLA is powered up again, a systems check will be performed and

STELLA will return to a normal working mode.

※

To check if the upgrade is successful or not, you can connect STELLA to your computer again. When the

upgrade is successful, the stella.xfw firmware file will disappear.