Waldorf Rocket - Manual (Page 24)

Additional Functions
Rocket User´s Manual 24
Additional Functions
MIDI Channel Settings
By using the MIDI Channel Selection button 6 on the
Rocket´s backside you can simultaneously set the desired
MIDI transmitting as well as receiving channel:
• Press and hold the MIDI Channel Selection button.
• Send any MIDI note from your MIDI master key-
board. The Rocket will identify the MIDI channel of
the sending device and set it as its own receiving and
transmitting channel.
Sending and Receiving Sound Data
The sound dump function lets you send the actual sound
parameter data of the Rocket via MIDI or USB.
After activation, all sound parameters of the Rocket are
sent as MIDI controller data to a connected computer.
Here you can record this data with a suitable software,
e.g. a sequencer application.
☞
Activation of the sound dump function:
• To send the data, press and hold the Launch button
for around one second.
• The corresponding MIDI controller data will automa-
tically be sent and can be easily recorded.
w
If you are working with the Rocket in a recording
studio, we recommend to save the actual sound
data at the beginning of the Rocket MIDI track.
This enables you to hear the right Rocket sound in
your music production.
☞
Receiving a sound dump:
• Send the recorded MIDI controller data to the Rocket.
The sound data will be automatically resumed.
w
Keep in mind: If sending sound data to the Rocket,
all actual sound parameter edits will be lost.
w
The following parameters can not send MIDI Con-
troller data: Headphone Volume, Filter Type
switch, Boost switch and the Launch button.