Vortech 1964-1967 Pontiac GTO Carbureted User Manual
Page 24
P/N: 4GJ020-210
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
12MAR08 v1.0 GTO(4GJ020-210 v1.0)
xxiv
16
14. CAC WATER RESERVOIR ASSEMBLY INSTALLATION
(STANDARD KITS,
SKIP TO STEP 17)
Fig. 14-a
A.
Remove the battery tray from the vehicle.
Install the supplied “CAC reservoir
mounting bracket” in its place using the
original hardware.
B.
Install a 1/2” NPT 90° hose barb fitting in
the side of the supplied water reservoir so
that it points down.
C.
Install a 1/2” NPT 90° hose barb into the
bottom hole of the reservoir pointing down.
D.
Test fit the reservoir in the installed bracket
(the supercharger pulley may need to
temporarily be removed if there is
interference).
E.
Attach a 90º hose to the bottom reservoir
fitting so that it runs under the reservoir
mounting bracket and toward the
passenger side of the vehicle.
F.
Install the original battery hold down to
secure the reservoir.
15. CAC WATER PUMP WIRING
(STANDARD KITS, SKIP TO STEP 17)
A.
Install the supplied eyelet onto the ground
(brown) wire of the water pump. Ground
the water pump using the sheet metal
screw in the next step.
B.
Route the water pump power wire to a
keyed power source and attach using the
supplied fuse holder and butt connectors.