Vortech 1964-1967 Pontiac GTO Carbureted - Manual (Page 22)

P/N: 4GJ020-210
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
12MAR08 v1.0 GTO(4GJ020-210 v1.0) xxii 14
12. CHARGE AIR COOLER (CAC) CORE INSTALLATION
(STANDARD KITS, SKIP TO STEP 17)
Fig. 12-a
Fig. 12-b
Fig. 12-c
A. Install the carburetor enclosure cover so
that the opening is on the passenger side
of the engine.
B. Install the inlet flange onto the enclosure
cover using a gasket and 5/16 x 1" socket
head cap screws.
C1. Driver Side S/C Mount. (Passenger Side
S/C Mount skip to step C2.)
1. Attach the CAC core to the inlet flange
using the supplied V-band clamp and
O-ring so that the open duct is left pointing
rearward.
2. Install the bypass valve onto the flange
on the discharge tube. Connect the
discharge tube to the open CAC duct using
the 90º silicone elbow.
3. Connect the discharge tube to the
supercharger using the large 90º tube.
C2. Passenger Side S/C Mount. (Driver Side
S/C Mount go back to step C1.)
1. Install the bypass valve onto the flange
on CAC core so that it will point forward.
2. Attach the CAC core to the inlet flange
using the supplied V-band clamp and
O-ring so that the open duct is left pointing
forward.
3. Connect the open duct to the
supercharger using the small discharge
tube and two sleeves.
D. Install and tighten a hose clamp on each
connection.
Fig. 12-d Fig. 12-e