Mounting bracket and supercharger installation – Vortech Universal GM LSX Tuner Kits User Manual

Page 25

P/N: 4GE020-015 v1.0, 2010-05-24

A. Locate the 4GE110-044 supercharger mount-

ing bracket assembly.

B. Install the supplied M10-1.5 x 90mm button

head screw into the upper alternator screw

location from which the OEM screw was pre-

viously removed. See Fig. 5A.

C. Make sure that the front face of the driver

side cylinder head is clean and smooth.

Mount the cylinder head plate to this face

using four (4) M10 x 30mm screws and

washers in the locations shown in Fig. 5B.

Route the nearby wiring harness behind the

plate, creating extra slack to the extent pos-

sible, taking care not to excessively pinch or

deform it. Tighten the screws.

Fig 5A

Fig 5B

5. MOUNTING BRACKET AND

SUPERCHARGER INSTALLATION

M10 X 90MM

BUTTON HEAD

M10X30MM