Damper & pulley installation – Vortech Universal GM LSX Tuner Kits User Manual

Page 14

P/N: 4GE020-015 v1.0, 2010-05-24

2. DAMPER & PULLEY INSTALLATION

A. Assemble the supplied ATI Super Damper

assembly as follows:

i. Insert the hub into the back of the damp-

er making sure to line up the “OFFSET

HOLE” in the hub and damper as shown

in Fig. 2A. This hole is labeled on the

damper sticker, and there is also an indi-

cator machined into both the damper and

the hub.

ii. Install the six (6) Torx T40 flat head

screws, using blue threadlocker on each,

and torque to 16 ft-lb. See Figures 2B &

2C.

NOTE: Make sure that all mating surfaces of the

parts are clean.

Fig 2A

Fig 2B

Fig 2C