Stop, Foreword – Vortech Universal GM LSX Tuner Kits User Manual

Page 2

P/N: 4GE020-015 v1.0, 2010-05-24

FOREWORD

Take note of the following before proceeding:

1. Proper installation of this supercharger kit requires gener-

al automotive mechanic knowledge and experience. Please

browse through each step of this instruction manual prior to

beginning the installation to determine if you should refer the

job to a professional installer/technician. Please contact your

dealer or Vortech Engineering for possible installers in your

area.

2. This product was designed for use on stock (un-modified, OEM) vehicles. The

PCM (computer), engine, transmission, drive axle ratios and tire O.D. must be

stock. If the vehicle or engine has been modified in any way, check with Vortech

prior to installation and use of this product.

3. Use only premium grade fuel with a minimum of 91 octane (R+M/2).
4. Always listen for any sign of detonation (knocking/pinging) and discontinue hard use

(no boost) until the problem is resolved.

5. Vortech is not responsible for any clutch, transmission, drive-line or engine damage.

Exclusions from Vortech warranty coverage considerations include,

but not limited to:

1. Neglect, abuse, lack of maintenance, abnormal operation or improper installation.
2. Continued operation with an impaired vehicle or sub-system.
3. The combined use of Vortech components with other modifications such as, but not

limited to, exhaust headers, aftermarket camshafts, nitrous oxide, third party PCM

programming or other such changes.

into another language in any form, by any means without written permission of Vortech Engineering, LLC.

STOP

his manual provides information on the installation, maintenance and service

of the Vortech supercharger kit expressly designed for this vehicle. All infor-

mation, illustrations and specifications contained herein are based on the lat-

est product information available at the time of this publication. Changes to the man-

ual may be made at any time without notice. Contact Vortech Engineering for any

additional information regarding this kit and any of these modifications at (805) 247-

0226 8:00am-4:30pm PST.