Vermona DRM1 MK2 - Manual (Page 5)

Getting started
Unpacking
All VERMONA devices are checked and tested carefully before packaging. In spite of special made cartons and
the solid buildup of the devices, damages during the transport are possible. Therefore we would like to please you
to check the unit after receipt for seeable damages.
Please do not discard the original packing! Use it for shipping the unit again, if this is necessary.
Inventory
The VERMONA DRM1 MKII comes complete with:
• The VERMONA DRM1 MK II
• Power cord
• This manual
Please ensure all items above are included. If something is missing contact your local dealer.
Connections
Setting up the necessary audio connections
• Connect the DRM1 MKII with the included power cord to the power socket.
• Connect the outputs of the DRM1 MKII (11) with the line inputs of your mixing console, amplifier, …
(Alternatively, you can use a headphone with the Phones jack (10).)
• Press the POWER switch to turn the device on – the POWER LED (2) flashes.
Note: Before connecting and disconnecting the DRM1 MKII to a power supply source, turn your amp’s volume
control all the way down to avoid damage due to on/off switching noise!
- Page 5 -