Velodyne Digital Drive Series - Manual (Page 37)

www.velodyne.com Digital Drive Series User’s Manual - 31
22. To manipulate a parametric EQ, you can now use the LEFT and RIGHT arrow keys to move the frequency
up and down, and the SET + and SET – keys to change the Q value. Use the UP and DOWN arrow keys
to adjust the level of the eQ as before. A selected eQ that has been moved, with its level raised and Q
adjusted is shown below:
23. To unselect the EQ, press SELECT again, then use the RIGHT and LEFT arrow keys to position the
cursor on another eQ if desired, and repeat step 22, until the room is equalized.