VDO WL MC 2.0 User Manual
Page 72
MC 2.0 WL
VDO CYCLECOMPUTING
72
DE
ENG
FR
ES
IT
NL
PL
ALTI DOWn--ALTI DOWn 1 or 2 is shown on the
display.
Press ALTI
A
or
P
to make a selection.
Press
M
in confirmation.
ALTI DOWn 1--SET METEr or FEET appears on the display.
The first digit of the altitude reading flashes.
Press ALTI
A
to reduce the value or
P
to increase it.
Once you have set the correct value, press
M
to confirm your setting.
The second digit flashes.
Press ALTI
A
to reduce the value or
P
to increase it.
Once you have set the correct value, press
M
to confirm your setting.
Continue the setting process until all digits have been set.
ALTI DOWn 1--SET OK?
Press
M
in confirmation.
The MC 2.0 confirms by displaying ALTI DOWn 1--SET DOnE.
To exit settings mode, press and hold the
C
button for three seconds.
SETTInGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
6.15 Setting the beeper
This area enables you to switch the heart rate warning beeper on or
off. If the current heart rate is below the lower limit set or above the
upper limit set, the beeper will beep.
Process:
Press and hold
M
for three seconds. SETTInGS--OPEn? flashes.
LAnGUAGE---SELECT---appears on the display.
Press ALTI
A
or
P
to scroll to BEEPEr---SET---.
Press
M
in confirmation.