VDO WL MC 2.0 - Manual (Page 61)

IT NL PL FR ES ENG DE
www.vdocyclecomputing.com MC 2.0 WL 61
WHEEL SIZE--BIKE 1 or BIKE 2 is shown on the
display.
Press ALTI
A or P to select BIKE 1 or BIKE 2.
Confirm the selection by pressing M .
WHEEL SIZE--MAnUAL SET or TYrE SELECT is
shown on the display.
Press ALTI
A or P to select MAnUAL SET or
TYrE SELECT list.
Confirm the selection by pressing
M .
If MANUAL SeT is selected:
The tyre size in mm flashes (if MPH is selected, the
size is displayed in inches). Press ALTI
A to reduce
the tyre circumference or P to increase it.
Once you have set the correct tyre circumference,
press
M to confirm your setting.
BIKE 1 (or BIKE 2) SET OK? is shown on the display.
Press M in confirmation or C to make a correction.
The MC 2.0 confirms by displaying WHEEL SIZE--SET DOnE.
If TYRe SeLeCT is selected:
Press ALTI A or P to scroll through the tyre list.
Once your tyre type is displayed (e.g. 700 x 23 C)
confirm it by pressing
M .
700 x 23 C--SELECT OK? is shown on the display.
Press
M to confirm the selection or C to change it.
The MC 2.0 confirms by displaying WHEEL SIZE--SET
DOnE.
To exit settings mode, press and hold the C button for three seconds.
SETTInGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
An overview of the tyre list can be found in the picture book >>> P07.