UVP 81-0357-01 PCR Hoods - Manual (Page 8)

PCR Workstations and Cabinets Page 8
5. Tighten all Frame screws to secure the Makrolon ® Panels in place.
Top Assembly and Shelf Assembly
1. Unwrap the Top Assembly.
2. Rest the Assembly on top of the Back Panel Assembly and side Makrolon
®
Panels.
CAUTION: Top is heavy!
WARNING: Ensure that the unit is not plugged in.
3. Pull all of the colored wires out of the Top Assembly.
4. Connect the bottom and Top Assembly wires together according to their labels, matching wire “A”
with wire “A,” wire “B” with wire “B” and so forth, until all labeled wires are connected. Connect the
wires by joining the male and female red connectors located on the ends of each wire. Then,
connect the two unlabeled green/yellow ground wires together using the red connectors.
After all connections are made, slightly pull each connection to ensure that all connectors are
seated together securely.
Makrolon ® Panel
Frames
Makrolon
®
Panels
Shelf Bracket